Table of Contents
Advertisement
CHAPTER 2: ASSEMBLY INSTRUCTIONS
ELLIPTICAL ASSEMBLY STEPS (continued):
STEP 11: Auxiliary Power Supply:
*This step is REQUIRED for units that are paired with a touchscreen or 15" TFT console.
a) Remove the rear access plastics on
the user's right sided of the elliptical.
b) Locate and cut the wire tie that
holds the power cable.
c) Disconnect the lower board
latching power cable.
d) Connect the power cable to the
power supply latching connector.
Disconnect
Reconnect
e) Connect the Power Supply input &
output connections as shown.
Input
Connection
Output
Connection
17
Truefitness.com / 800.426.6570 / 636.272.7100
Advertisement
Table of Contents
