Table of Contents
Advertisement
CHAPTER 2: ASSEMBLY INSTRUCTIONS
ELLIPTICAL ASSEMBLY STEPS (continued):
STEP 3: Attach Side Arms:
a) Connect Side Arm Heart Rate
Cable
b) CAREFULLY Slide Side Arm into
Pedestal and tuck the Heart Rate
Cable into the tube. Make sure to not
pinch the Heart Rate Cable wires.
Connect Wires
between the Pedestal
Side Arms
and the
c) Use 4 M8x12mm bolts to tighten
the Side Arms into the underside of
the Pedestal.
Hardware Required (Bag 3):
4 M8x12bolts
STEP 4: Upper Exercise Arms:
a) Install each upper arm with 4
M8x1.25x16mm bolts using a 6 mm
hex key.
Note: Upper Arms are labeled "L"
for Left and "R" for Right.
Hardware Required (Bag 4):
8 Tapered M8x16mm Bolts
4 Bolts
Arm
per
Truefitness.com / 800.426.6570 / 636.272.7100
12
Advertisement
Table of Contents
