Table of Contents
Advertisement
UPSI-1208DPx
A Brief specification
UPSI-1208DP2 / -DP3
12 V DC / 8 A
12 V DC UPS (DIN rail version)
Integrated Supercaps (DP2) OR
LiFePO4 battery (DP3)
Up to 500 000 cycles (DP2) |
up to 6 000 cycles (DP3)
Capacity DP2: 5.73 kJ | DP3: 25 Wh
Intelligent input current detection
Regulated output voltage in battery mode
Minimum load detection
Power-fail timer function
Relay dry contact on power fail
Reboot function
Fuel gauge
Shutdown via external signal
Te chn ic al Dat a
Input voltage
Input current
Output voltage
Output current
Capacitive load
Charging method
Protection
Interface
Battery technology
Ambient temperature
Operating altitude
Max. permitted humidity
Dimensions W/ H / D
Weight
Revision 1-5
12 V DC (11.5...16 V)
9 A max.
Normal mode: V
– 0.6 V DC max. (depending on load)
IN
Battery mode: 12 V DC
8 A nominal
3000 µF (at start)
CC / CV / CP
Reverse polarity protection at input, Overcurrent protection at output,
Short circuit protection at output
USB, RS232, HID UPS
DP2: EDLC 5.73 kJ (3.88 kJ useful) / 1.59 Wh (1.08 Wh useful)
DP3: LiFePO4 2.5 Ah / 25 Wh
Operating:
Storage / Transport:
DP2: -20...+65 °C
DP2: -30...+65 °C
DP3: -20...+55 °C
DP3: -30...+55 °C, recommended state of charge 80 %
≤4000 m
≤95 % (at +25 °C, no dew)
63 x 120 x 100 mm ±0.5 mm
(without front connectors and DIN-Rail mounting bracket)
0.6 kg
4
Advertisement
Table of Contents
