Cleaning And Care - Vitek VT-1333 Manual Instruction

•
•
Note:
– Always switch the unit off and unplug it if it is not
– Never leave the unit connected to the mains unat-
– You can form a lock by clamping the lock end and

CLEANING AND CARE

•
•
•
•
•
STORAGE
•
•
•
•
•
•
DELIVERY SET
Hair straightener – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50/60 Hz
Rated input power: 60 W
T-1333_70x130.indd 7
Avoid contact of heated surfaces with your face, neck
and other parts of your body.
After you finish using the unit press and hold the on/
off button (2), the «OFF» symbols will appear on the
display (5); unplug the unit. Let the unit cool down.
used.
tended; if you forgot to switch the unit off, it will be
switched off automatically in 60 minutes.
wrapping the hair around the outer surface, wait a
little and remove the lock from the unit.
Before cleaning, unplug the unit and let it cool down
completely.
Never immerse the unit into water or other liquids.
Wipe the heating plates and the unit body with a soft
damp cloth and then wipe them dry.
Do not use steam cleaners.
Do not use abrasives and solvents to clean the unit.
Always unplug the unit if it is not being used.
Let the unit cool down completely before taking away
for storage.
Never wind the power cord around the unit, as it can
damage the cord.
For easy storing press the heating plates together
and move the lock (5).
You can store the unit by hanging it by the loop (6)
provided that no water gets on it in this position.
Keep the unit in a dry cool place out of reach of chil-
dren and disabled persons.
ENGLISH
7
8/27/20 11:24