Before The First Use - Vitek VT-1333 Manual Instruction

•
•
•
•
•
•
•
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.
ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION
AREAS AND WORK SPACES IS PROHIBITED.

BEFORE THE FIRST USE

After unit transportation or storage at low tempera-
ture keep it for at least three hours at room tempera-
ture before switching on.
•
•
•
•
•
HAIR STRAIGHTENING
•
T-1333_70x130.indd 5
The power cord may not:
– touch hot objects,
– run over sharp edges,
– be used as a handle for carrying the unit.
Check the integrity of the power cord periodically.
To avoid damages, transport the unit in the original
package only.
Do not use the unit if the power cord or plug is dam-
aged, if the unit works improperly or after it was
dropped.
If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or similar
qualified personnel to avoid danger.
Do not attempt to repair the unit. Do not disassemble
the unit by yourself, if any malfunction is detected or
after it was dropped, unplug the unit and apply to any
authorized service center at the contact addresses
given in the warranty certificate and on the website
www.vitek.ru.
Keep the unit in a dry cool place out of reach of chil-
dren and disabled persons.
Unpack the unit and remove any stickers that can pre-
vent unit operation.
Unwind the power cord to its full length.
Check the unit for damages, do not use it in case of
damages.
Before plugging the unit in make sure that the oper-
ating voltage of the unit corresponds to the voltage
of your mains.
The unit is intended for operation from an AC power
network with the frequency of 50 or 60 Hz. The unit
does not need any additional settings for operating
with the required rated frequency.
The unit can be used for both long and short hair.
ENGLISH
5
8/27/20 11:24