Warning Display; For The First Use; How To Make Bread - Gemini GBM750W Manual

WARNING DISPLAY

1. If the display shows "
inside is still too high (accompanied by 5 beep sounds). Then the program has to
be stopped. Open the lid and let the machine cool down for 10 to 20 minutes.
2. If the display shows"
programs BAKE), it means the temperature inside is too low (accompanied by 5
beep sounds), stop sound by pressing the
let the machine rest for 10 to 20 minutes to return to room temperature.
3. If the display shows "
sensor is disconnected please check the sensor carefully by Authorized expert.

FOR THE FIRST USE

1. Please check if all parts and accessories are complete and free of damage .
2. Clean all the parts according to the latter section "
3. set the bread maker in baking mode and bake empty for about 10 minutes. After
cooling it down clean once more.
4. Dry all parts thoroughly and assembly them, so the appliance is ready for using.

HOW TO MAKE BREAD

1. Place the pan in position and turn it clockwise until it clicks in correct position. Insert
the kneading blade onto the drive shaft. It is recommended to fill holes with heat-
resisting margarine prior to placing the kneaders, this avoids the dough to stick
below the kneaders and the kneaders could be removed from bread easily.
2. Place ingredients into the bread pan. Please keep to the order mentioned in the
recipe. Usually the water or liquid substance should be put firstly, then add sugar,
salt and flour, always add yeast or baking powder as the last ingredient.
Note: the maximum quantities of the flour and yeast which may be used refer to the recipe.
Note: The maximum quantity of flour and yeast separately is 490g and 6g.
3. With finger make a small indentation on one side of the flour. Add yeast to indenta-
tion, Make sure it does not come into contact with the liquid ingredients or salt.
4. Close the lid gently and plug the power cord into a wall outlet.
5. Press the Menu button until your desired program is selected.
COLOR
6. Press the
LOAF
7. Press the button to select the desired size (1.5lb or 2lb ).
8. Set the delay time by pressing
the bread maker to start working immediately.
HHH
" after the program has been started, the temperature
LLL
"after pressing the
EE0
" after you have pressed
Yeast or soda
Drying redients
Water or liquid
button to select the desired crust color.
or button. This step may be skipped if you want
7
START/STOP
button ( except the
START/STOP
button, open the lid and
START/STOP
Cleaning and Maintenance
, the temperature
"