Creating An Ahci Driver Floppy Diskette Under Vista - DFI NP951-B16C User Manual

4
Supported Software

Creating an AHCI Driver Floppy Diskette under Vista

The system board package includes floppy diskettes which are needed when you
install the AHCI driver during Windows Vista installation. If in any case you lost
the diskette, you can create another one by following the steps below.
1. Insert the provided CD into a CD-ROM drive.
2. The execution files are located in:
drive:>\AHCI_RAID\F6FLOPPY
3. Run f6flpy32.exe (for 32-bit system) or f6flpy64.exe (for 64-bit system).
4. Insert a blank floppy diskette then click OK.
5. The system will format and write the necessary driver files into the diskette.
102