Installing The Ahci Driver During Windows 7 / Windows Vista Installation - DFI NP100-N16C User Manual

4
Supported Software

Installing the AHCI Driver During Windows 7 / Windows Vista Installation

The AHCI driver must be installed during Windows 7 / Windows Vista installation.
This is required in order to be able to install the operating system onto a hard
drive that is configured in AHCI mode.
Note:
The illustrations below were captured from the Windows 7 operating sys-
tem. Except for slight differences in their screen appearance, the instal-
lation procedure is also the same for Windows Vista.
When you insert the operating system's installation disc into an optical drive, the
message Press any key to boot from CD or DVD will appear. Press Enter.
1. Enter the preferred lan-
guage and other prefer-
ences then click Next.
2. Click Install Now.
110