Chapter 1 - Introduction; Specifications - DFI NP951-B16C User Manual

1
Introduction

Chapter 1 - Introduction

Specifications

Processor
Chipset
System Memory
Expansion Slots
Graphics
Audio
LAN
Serial ATA
Rear Panel I/O
Ports
10
• Intel Atom N270 (Diamondville SC) processor
® TM
• 1.6GHz core frequency, 1.10V voltage
• 2.5W thermal design power
• 512KB on-die second level cache
• 533-MT/s FSB
• 22x22 mm, 1.0 mm ball pitch and 437 balls FCBGA
• Intel chipset
®
- Northbridge: Intel
- Southbridge: Intel
• One 200-pin DDR2 SODIMM socket (1.8V)
• Maximum memory supports up to 2GB
• Supports 400MHz and 533MHz DDR2 SDRAM
• 1 mini PCI slot
• 133/166MHz internal graphics core render frequency at
1.05V core voltage
• Supports 18-bit dual-channel LVDS
• Supports CRT resolutions up to SXGA+
• Realtek ALC262 2-channel High Definition Audio CODEC
• Two 24-bit stereo DACs and three 20-bit stereo ADCs
• S/PDIF input/output interface
• One Realtek RTL8111C PCI Express Gigabit controller
• Supports 10Mbps, 100Mbps and 1Gbps data transmission
• IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) com-
pliant
• One Serial ATA interface which is compliant with SATA 1.0
specification (1.5Gbps interface)
• Two-mode operation supports legacy mode using I/O space
or an AHCI mode using memory space
• SATA and PATA can be used in a combined function mode
(When SATA is used with PATA, AHCI mode is not support-
ed.)
• 1 mini-DIN-6 port for PS/2 mouse and PS/2 keyboard ports
• 1 DC-in 12V jack or 4-pin ATX 12V power connector
(optional)
• 1 DB-9 serial port (with selectable power)
• 1 DB-15 VGA port
• 1 RJ45 LAN port
• 2 USB 2.0/1.1 ports
945GSE GMCH
®
82801GBM ICH7M
®