Table of Contents
Advertisement
2
Hardware Installation
Wake-On-USB Keyboard/Mouse (USB 0-1 and USB 2-3 only)
The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or
USB mouse to wake up a system from the S3 (STR - Suspend To RAM) state. To
use this function:
•
Jumper Setting
JP3 and/or JP4 must be set to "2-3 On: 5V_standby". Refer to "USB Power
Select" in this chapter for more information.
•
BIOS Setting
"USB KB Wake-Up From S3" in the Power Management Setup submenu of the
BIOS must be set to Enabled. Refer to chapter 3 for more information.
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB
ports, the 5V_standby power source of your power supply must support
≥1.5A. For 3 or more USB ports, the 5V_standby power source of your
power supply must support ≥2A.
30
Advertisement
Table of Contents
