Openplan Systems XPAND REACH Assembly Instructions Manual
Double station – manager station-
Hide thumbs
Also See for XPAND REACH:
- Assembly instruction manual (9 pages) ,
- Assembly instructions manual (6 pages) ,
- Assembly instructions (3 pages)
Advertisement
Quick Links
XPAND REACH
Double Station – Manager Station- Assembly
Instructions
Tools Required
Cordless Drill
Philips bit with extension
for Work Surface screws
(XP-Screw-WS)
3/16 Hex drive bit
for XP-Screws
Measuring Tape
Level
Rubber Mallet
For additional assembly support, refer to www.openplan.com
or contact 844.OPS.OPS1
www.openplan.com | 844.OPS.OPS1 | sales@openplan.com
Advertisement
Related Manuals for Openplan Systems XPAND REACH
Summary of Contents for Openplan Systems XPAND REACH
- Page 1 XPAND REACH Double Station – Manager Station- Assembly Instructions Tools Required Cordless Drill Philips bit with extension for Work Surface screws (XP-Screw-WS) 3/16 Hex drive bit for XP-Screws Measuring Tape Level Rubber Mallet For additional assembly support, refer to www.openplan.com or contact 844.OPS.OPS1...
- Page 2 XPand Reach- Double Station – Manager Station XPand Parts Used for Assembly Item Part name Part Description Image Item Part name Part Description Image XP-LA Leg Assembly XP-CTA-XX Cable Tray Stretcher Bar XP-SB-Bracket XP-CTC Cable Tray Clip Bracket Work Surface XP-LR-XX Leg Rail, XX”...
- Page 3 XPand Reach- Double Station – Manager Station XPand offers two types of end legs, Tapered legs and Rectangular legs. Though the legs look different, the assembly process is same. Tapered leg Rectangular leg (XP-LA) (XP-LA-RL) Step 3: Attach another Leg Assembly to...
- Page 4 XPand Reach- Double Station – Manager Station Step 5: Assemble the Stretcher Bars (XP-SB-XX) to the Step 4: Assemble (2) XP-SB-Brackets to the Leg Rail XP-SB-Brackets using (2) XP-Screws per Bracket. using (2) XP-Screws per Bracket. Make sure the Top Face of the Bracket faces upwards.
- Page 5 XPand Reach- Double Station – Manager Station Step 7: Assemble both the Mid Leg Assemblies to the Stretcher Bars using (2) XP-Screws per Connector. Step 8: Repeat Step 2 to Step 7 to build another station with Mid-Leg assembly. Assemble the Stretcher Bar to the Mid...
- Page 6 XPand Reach- Double Station – Manager Station Step 9: Place Work Surface Support Arms (XP-WSSA-XX) on either side of the Stretcher bar and assemble it with the (2) XP-Screws per arm. Note: If the Stretcher bars are longer than 48”, assemble (1) XP-WSSB to the center of the Stretcher bar using (1) XP- Screw as a Set Screw.
- Page 7 XPand Reach- Double Station – Manager Station Step 12: Assemble 9” Stretcher Bar to the Mid Leg Connector (XP-MLC) using (2) XP-Screws. Step 13: Assemble XP-WSSB to Stretcher Bar using (1) XP-Screw as a Set Screw. www.openplan.com | 844.OPS.OPS1 | sales@openplan.com...
- Page 8 XPand Reach- Double Station – Manager Station Step 16: Assemble the XP-SB-Bracket to the Center Step 14: To Build a Single bench, Step 15: Attach another Leg Assembly location of the Leg Rail using (2) XP-Screws. Make attach the Leg Assembly (XP-LA) to the other end of the Leg Rail using sure the Top Face of the Bracket faces upwards.
- Page 9 XPand Reach- Double Station – Manager Station Step 18: Repeat steps 14-16 to build another End Leg Assembly with SB-Bracket. Assemble the 2 Leg assembly to the Stretcher Bar using (2) XP-Screws. Right End Leg Assembly SB < 45” Left End Leg Assembly SB >...
- Page 10 XPand Reach- Double Station – Manager Station Step 20: Place the Work Surfaces on the support brackets. Leave ½” overhang on each side edge. Secure the Work Surface (on the Double Stations) to the XP-WSSA-XX using (4) glides & (8) Work Surface Screws (XP-SCREWS-WS) per arm (Shown in Figure C). Secure the Work Surface on Managers Desk using Work Surface screws.