Advertisement
Quick Links
Advertisement
Related Manuals for Openplan Systems PGHM
Summary of Contents for Openplan Systems PGHM
- Page 1 PGHM Installation Manual Open Plan Systems 2021 www.openplan.com...
- Page 2 PGHM INSTALLATION: MODESTY PANEL UNDER WORK SURFACE WARNING! PGHM screens must be tightened by hand. Plexiglass and glass are subject to cracking and breaking if power tools are used. PGHM White Pads 1. In your package, you will receive the...
- Page 3 5. Drill holes where you marked. Once holes are drilled, place the back of the PGHM on the space where you marked in step 3. Be sure not to drill through the work surface. 6. Establish your hole location. Mount the block using 2 1”...
- Page 4 9. Add the other piece of white padding to the pegs on the PGHM. 10. Connect the front of the PGHM with the back of the PGHM. To hold in place, take the 2 short allen screws and screw those in so the mullion stays in place.
- Page 5 PGHM INSTALLATION: MULLION ON PANEL WARNING! PGHM screens must be tightened by hand. Plexiglass and glass are subject to cracking and breaking if power tools are used. PGHM White Pads 1. In your package, you will receive the following: -Mullion...
- Page 6 5. Drill holes where you marked. Once holes are drilled, place the back of the PGHM on the space where you marked in step 3. 6. Establish your hole location. Mount the block using 2 1” Phillips screws. 7. After drilling in the...
- Page 7 10. Add the other piece of white padding to the pegs on the PGHM. 11. Connect the front of the PGHM with the back of the PGHM. To hold in place, take the short allen screws and screw those in so the mullion stays in place.
- Page 8 PGHM INSTALLATION: MULLION ON WORK SURFACE WARNING! PGHM screens must be tightened by hand. Plexiglass and glass are subject to tcracking and breaking if power tools are used. PGHM White Pads 1. In your package, you will receive the following:...
- Page 9 5. Drill holes where you marked. Once holes are drilled, place the back of the PGHM on the space where you marked in step 3. 6. Establish your hole location. Mount the block using 2 1” Phillips screws. 7. After drilling in the...
- Page 10 10. Add the other piece of white padding to the pegs on the PGHM. 11. Connect the front of the PGHM with the back of the PGHM. To hold in place, take the short allen screws and screw those in so the mullion stays in place.