Openplan Systems XPAND REACH Assembly Instructions

Single station: spine glass/return end glass

Hide thumbs Also See for XPAND REACH:

XPAND REACH

Single Station: Spine Glass/Return End Glass

- Assembly Instructions

Tools Required

Cordless Drill

Philips bit with extension

for Work Surface screws

(XP-Screw-WS)

Level

Rubber Mallet

For additional assembly support, refer to www.openplan.com

or contact 844.OPS.OPS1

www.openplan.com | 844.OPS.OPS1 | sales@openplan.com

Table of Contents

Do you have a question about the XPAND REACH and is the answer not in the manual?

Page 1 XPAND REACH Single Station: Spine Glass/Return End Glass - Assembly Instructions Tools Required Cordless Drill Philips bit with extension for Work Surface screws (XP-Screw-WS) Level Rubber Mallet For additional assembly support, refer to www.openplan.com or contact 844.OPS.OPS1 www.openplan.com | 844.OPS.OPS1 | sales@openplan.com...
Page 2 XPand Reach Single Station: Spine Glass/Return End Glass XPand Parts Used for Assembly Item Part name Part Description Image XP-G-XXXX/ XP-G-XXXXF Clear/Frosted Glass Glass Extrusion End Caps for XP-G-RSB-EC Return screens-Pair XP-G-EXX Glass Extrusion XX” 2" X 3" Flat Bracket...
Page 3 XPand Reach Single Station: Spine Glass/Return End Glass To assemble the Rear/Return Glass Assembly to the Single Bench, Modified Flat brackets and XP-G-RSB-EC (End Caps for Return Screen) are used. Refer to “Single Station Bench Assembly Instructions” to build the Single Bench.