Openplan Systems XPAND REACH Assembly Instructions Manual
Conference table
Hide thumbs
Also See for XPAND REACH:
- Assembly instructions manual (10 pages) ,
- Assembly instruction manual (9 pages) ,
- Assembly instructions (3 pages)
Advertisement
Quick Links
XPAND REACH
Conference Table – Assembly Instructions
Tools Required
Cordless Drill
Philips bit with extension
for Work Surface screws
(XP-Screw-WS)
3/16 Hex drive bit
for XP-Screws
Measuring Tape
Level
Rubber Mallet
For additional assembly support, refer to www.openplan.com
or contact 844.OPS.OPS1
www.openplan.com | 844.OPS.OPS1 | sales@openplan.com
Advertisement
Related Manuals for Openplan Systems XPAND REACH
Summary of Contents for Openplan Systems XPAND REACH
- Page 1 XPAND REACH Conference Table – Assembly Instructions Tools Required Cordless Drill Philips bit with extension for Work Surface screws (XP-Screw-WS) 3/16 Hex drive bit for XP-Screws Measuring Tape Level Rubber Mallet For additional assembly support, refer to www.openplan.com or contact 844.OPS.OPS1...
-
Page 2: Part Description
XPand Reach – Conference Table XPand Parts Used for Assembly Item Part name Part Description Image XP-LA Leg Assembly XP-SB-Bracket Stretcher Bar Bracket XP-45D-XX-TL 45 Degree Table Leg Rail, XX” XP-WSSB Work Surface Support Bracket XP-SB-XX Stretcher Bar, XX” 10-9X1 PH Pan Head, ST P’bd... - Page 3 XPand Reach – Conference Table XPand offers two types of end legs, Tapered legs and Rectangular legs. Though the legs look different, the assembly process is same. Tapered leg Rectangular leg (XP-LA) (XP-LA-RL) Step 1: Prepare a large floor space to put the XPand order Step 2: Assemble the Leg Rails (XP-45D-XX-TL) to the Legs using (2) XP-Screws.
- Page 4 XPand Reach – Conference Table Step 3: Assemble (2) XP-SB-Brackets to the Leg Step 4: Assemble the Stretcher Bars (XP-SB-XX ) to the XP- Rail using (2) XP-Screws per Bracket. Make sure SB-Brackets using (2) XP-Screws per Bracket. the Top Face of the Bracket faces upwards.
- Page 5 XPand Reach – Conference Table Step 5: Repeat Step 2 through 4 to assemble the other end of Step 6: Assemble XP-WSSB to the Stretcher bars using XP-Screws as a Set Screw. See Figure B on page 6 for additional support Stretcher Bars.
- Page 6 XPand Reach – Conference Table SB > 45” - 80” SB = 30” - 45” SB < 30” SB = Stretcher Bar length Figure C Note: Figure C shows the number of XP-WSSB’s assembled to Stretcher Bars of different lengths.