Openplan Systems EMERGE II Assembly Manual

1.

Attach the Baseplate

Flip over the main part of
your Emerge II unit to attach
the baseplate to the bottom.
Use 8 screws to secure the
baseplate.
2.

Build the Arm

Flip the provided work
surface upside down then
attach the arm to the work
surface. This will use 5 screws.
3.

Attach the Arm

Slide the arm over the top of
the main unit. There will be
four holes at the bottom of
the main unit that align with
the arm to attach it.
4.

Secure the Top Plate

Single Monitor Unit - Mount
the top plate and monitor
to the provided VESA mount,
then skip to step 8.
Multiple Monitor Units - If you
are using a multiple monitor
system, attach the top plate,
then secure the monitor
arm pole to the plate. Once
complete continue to step 5.
www.openplan.com | 844.OPS.OPS1 | sales@openplan.com
EMERGE II ASSEMBLY GUIDE
1
2
3
4
Single Mount Multi Mount