Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Openplan Systems Manuals
  4. Indoor Furnishing
  5. XPAND REACH
  6. Assembly instruction manual

Openplan Systems XPAND REACH Assembly Instruction Manual

Double bench: multiple station
Hide thumbs Also See for XPAND REACH:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
XPAND REACH
Double Bench: Multiple Station- Assembly Instructions
Tools Required
Cordless Drill
3/16 Hex drive bit
for XP-Screws
Measuring Tape
Level
Rubber Mallet
For additional assembly support, refer to www.openplan.com
or contact 844.OPS.OPS1
www.openplan.com | 844.OPS.OPS1 | sales@openplan.com

Advertisement

loading

Related Manuals for Openplan Systems XPAND REACH

Summary of Contents for Openplan Systems XPAND REACH

  • Page 1 XPAND REACH Double Bench: Multiple Station- Assembly Instructions Tools Required Cordless Drill 3/16 Hex drive bit for XP-Screws Measuring Tape Level Rubber Mallet For additional assembly support, refer to www.openplan.com or contact 844.OPS.OPS1 www.openplan.com | 844.OPS.OPS1 | sales@openplan.com...
  • Page 2 XPand Reach – Double Multiple Stations XPand Parts Used for Assembly Item Part name Part Description Image Item Part name Part Description Image XP-LA Leg Assembly XP-CTA-XX Cable Tray Stretcher Bar XP-SB-Bracket XP-CTC Cable Tray Clip Bracket Work Surface XP-LR-XX Leg Rail, XX”...
  • Page 3 XPand Reach – Double Bench: Multi Station XPand offers two types of end legs, Tapered legs and Rectangular legs. Though the legs look different, the assembly process is same. Tapered leg Rectangular leg (XP-LA) (XP-LA-RL) Step 1: Prepare a large floor space to put...
  • Page 4 XPand Reach – Double Bench: Multi Station Step 5: Assemble the Stretcher Bars (XP-SB-XX) to the Step 4: Assemble (2) XP-SB-Brackets to the Leg Rail XP-SB-Brackets using (2) XP-Screws per Bracket. using (2) XP-Screws per Bracket. Make sure the Top Face of the Bracket faces upwards.
  • Page 5 XPand Reach – Double Bench: Multi Station Step 6: Assemble two XP-MLC (Mid Leg Connector) to the XP-LA legs using (2) XP-Screws. Note: For orders with Return Glass Assemblies , XP-MLC-S is used instead of XP-MLC The (2) holes on...
  • Page 6 XPand Reach – Double Bench: Multi Station Step 8: Repeat Step 2 to Step 5 to build another End Leg Assembly with XP-SB- Brackets and Stretcher Bars. Assemble the Stretcher Bar to the Mid Leg Connector using (2) XP-Screws per Connector.
  • Page 7 XPand Reach – Double Bench: Multi Station Step 10: Slide Cable Tray Clips onto the Cable Trays. Step 11: Secure the assembled Cable Tray Clips to the Stretcher Bar. www.openplan.com | 844.OPS.OPS1 | sales@openplan.com...
  • Page 8 XPand Reach – Double Bench: Multi Station Step 12: If the Stretcher bars are longer than 48”, assemble (1) XP-WSSB to the center of the Stretcher bar using (1) XP-Screw as a Set Screw. Note: No XP-WSSB is used for Stretcher bars less than 48”.
  • Page 9 XPand Reach – Double Bench: Multi Station Step 14: Snap on the Leg Rail Covers (XP-LRC-XX) to the Leg Rails. Step 15: Level the Station unit by turning the leveling feet. Note: For Rectangular legs, use Rectangular Leg Rail covers (XP-LRC-R-XX) to the leg rails.