Transferring A Call After A Speaker Call Announcement In A Group; Sending A Trunk Flash - Octopus F620 HFA Operating Instructions Manual

Step by Step
Consultation?
*80=Speaker call?
Transfer?
*51=Trunk flash?
Transferring a call after a speaker call
announcement in a group
If this function has been configured (contact your service personnel),
you can use a speaker call (announcement,
nounce a call in progress to a group of users
After a member of the group has accepted the call request, you can
transfer the waiting party.
Prerequisite: You are conducting a call.
Confirm. The other party is placed on hold.
$ Press the key shown.
Select and confirm the option shown.
j Enter the group's station number.
[ Announce the call.
When a member of the group accepts the call
connected to this party.
\ Replace the handset.
or
Select and confirm the option shown.
If the connection between the two other parties is not estab-
lished within 45 seconds, the call from the first part returns to
you (recall).

Sending a trunk flash

To activate ISDN-type services and features through the network car-
rier's analog trunks or those of other communications platforms
(such as "consultation hold"), you must send a signal to the trunks be-
fore dialing the service code or telephone number.
Prerequisite: You have set up an external connection.
N Press the key shown.
Select and confirm the option shown.
j Enter the service code and/or telephone number.
Enhanced phone functions
Page 78) to an-
Page 45.
Page 36, you are
53