DUMP CYLINDER CHECK
1. Check the power buggy's dump cylinder as outlined in
the operation section of this manual.
2. Make sure that both zerk fittings for the dump cylinder
have been lubricated.
HYDRAULIC OIL CHECK
3. Visually read the hydraulic sight glass (Figure 8) to see
if the hydraulic oil level is low.
4. If the hydraulic oil is low, add enough hydraulic oil to
bring oil level to a normal safe operating level.
Figure 8. Hydraulic Sight Glass
WBH-16 SERIES POWER BUGGY • OPERATION AND PARTS MANUAL — REV. #2 (09/12/19) — PAGE 19
INSPECTION