Wren Kitchens VOID CORNER POST Fittings Manual

Advertisement

FITTING GUIDE
VOID CORNER POST

Step 1.

Place the Packer (C) flush with the front edge of the cabinet. Screw into any side cabinets using
the 1 3/4" screws (I) provided to secure the cabinet. Screw just to the rear of the hinge mounting
plate, at the top and the bottom of both sides of the cabinet.
Conceal screw head under hinge bracket where possible.
Repeat this step on the adjoining cabinet with packer (D), making sure to place the panel on
the correct side as shown above.
Page 1
FI.PK.FIT.010 - VOID CORNER POST
(I) x8 1 3/4" Screws
Panel A
Panel B
C
B
Sample cabinet shown
I
C
I
For Internal Use:FI.PK.FIT.010_50-WKIN00005_Void_Cnr_Post_Rev4.indd
(H) x6 1 1/4" Screws
Packer C/D (3 5/8")
D
A
I
D
I

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VOID CORNER POST and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Wren Kitchens VOID CORNER POST

  • Page 1 FITTING GUIDE FI.PK.FIT.010 - VOID CORNER POST VOID CORNER POST (I) x8 1 3/4” Screws (H) x6 1 1/4” Screws Packer C/D (3 5/8”) Panel A Panel B Sample cabinet shown Step 1. Place the Packer (C) flush with the front edge of the cabinet. Screw into any side cabinets using the 1 3/4”...
  • Page 2 FITTING GUIDE Note: To adjust cabinets in (X) plane simply move panel (A) accordingly. To adjust in (Y) plane, you must VOID CORNER POST cut panel (B) and the packer (C) accordingly. Sample cabinet shown Step 2 Cut panel (B) to size according to Kitchen Plan.

This manual is also suitable for:

Fi.pk.fit.010

Table of Contents