Tripp Lite B127A-1A1-FHFH Owner's Manual page 23

Installation
B127A-1A1-BHFH
1
Up to 230 ft. (70 m) Cat6 cable at 4K / 60 Hz.
2
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K / 60 Hz.
IR Control
Pad Sensor
Monitor
HDR Player
Local / Transmitter
1. Using an HDMI 2.0 cable, connect the HDMI source to the
INPUT port on the local transmitter unit.
2. Optional: Using an HDMI 2.0 cable (such as Tripp Lite
P569-XXX-CERT or P568-XXX-2A Series cables), connect a
local monitor to the LOCALOUT port on the B127A-1A1-BHFH
local transmitter unit.
3. Using Cat6 cable, connect the RJ45 port on the local
transmitter unit to the RJ45 port on the remote receiver unit.
Optional: For extended transmission distance, connect a
B127A-010-H signal booster between the transmitter and
receiver (sold separately, see tripplite.com).
Extender Kit
IR IR Control
Pad
23
IR
Sensor
Remote / Receiver
TV