Advertisement
Installation
B127A-1A1-FDFH Wall-Plate Extender Kit
Notes:
• Make sure all equipment in the installation--such as monitors, an
HDMI notebook PC and the transmitter--is powered OFF.
• Test to ensure the entire installation works properly before pulling
cables through ceilings/walls.
• To achieve maximum distance and performance, use 24 AWG solid
wire Cat6 cable. Using stranded-wire Cat6 cable, or cable with a
gauge (AWG) size higher than 24 AWG, will result in shorter extension
distance. Higher gauge cabling, such as 26 AWG, has a more limited
transmission capability than lower gauge cabling. All Tripp Lite
N202-Series Cat6 cables are made with 24 AWG solid-wire cabling.
• External power is not required for remote receiver units due to Power-
over-Cable (PoC) technology incorporated in the transmitter units.
B127A-1A1-FDFH
1
Up to 230 ft. (70 m) Cat6 cable at 4K / 60 Hz.
2
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K / 60 Hz.
3
Up to 15 ft. (4.5 m) DisplayPort cable at 4K / 60 Hz.
Monitor
Local / Transmitter
Extender Kit
DisplayPort
Source
Remote / Receiver
19
TV
Advertisement
