Table of Contents
Advertisement
Flush Mount Side Trim
After the unit has been placed in the cutout, leveled and all connections completed, the unit will need to be fastened to the cabinetry. Open the
door. Using the fl at wood screws, fasten the unit to the cabinetry on both sides. NOTE: Only use the screws provided and use caution when
installing the fastening screws to prevent scratching the frame. Use a 3" Phillips driver to prevent damage.
Door Panel Adjustments
On the side of each panel, at the top and bottom there is a vertical
slot with a cam spacer for front to back adjustments. In the center,
there is a horizontal adjustment for up and down. All hardware
needs to be loosened before adjusting.
Flat wood screws
Vertical slot for front
to back adjustment
Horizontal slot for up
and
down adjustment
21
Push decorative magnetic trim into affi xed side trim on both
sides of unit until the trim is all the way in and stops. Close
the door.
Advertisement
Table of Contents
