Advertisement
Available languages
Available languages
INSTALLATION INSTRUCTIONS
Electrical connection
1 This appliance must be connected to a 220V, 50Hz, sinusoidal, 10A
electrical supply.
2 Uncoil the power cord, remove and discard the plastic pin cover and plug into a
power socket.
3 Connect the appliance to an earthed outlet protected by a fuse of suitable capacity.
■ Check the power cord for damage and make sure it is not squashed or twisted when
installing the dryer.
■ Always remove the power cord from the power socket by the plug, not by the cord.
IMPORTANT!
■ Do not touch or operate the dryer with wet hands or with bare feet.
■ A damaged power cord must be replaced by a Haier trained and supported
service technician. The appliance must not be operated until it is repaired, as there
is risk of electric shock.
■ Do not operate this dryer if it has been damaged during transport. Contact your
Haier trained and supported service technician.
Product specifications
Capacity (kg)*
DIMENSIONS (mm)
Width
Depth
Height
ELECTRICAL
Volts
Hz
Amps (maximum)
Rated Power (W)
Waterproof degree
* Capacity refers to the maximum dry weight of items the dryer can dry at any one time.
Rated capacity is determined by a country's performance standards, so similar dryers may
have different capacities for different markets.
HDV70E1
7
600
585
830
220
50
10
1750
IPX4
11
Advertisement
