Advertisement
Available languages
Available languages
PROBLEM
Fault code warning
Noises.
Vibration.
Creasing.
Dye transfer.
Tangling.
TROUBLESHOOTING
POSSIBLE CAUSES
Dryer has a fault.
Dryer is overloaded.
Dryer has a fault.
Beeps signalling the end of a
drying cycle.
Dryer is not installed on a stable
surface.
Dryer is overloaded.
Dryer is overloaded.
'Temperature' selected too
hot for load type.
'Anti-crease' option not
selected.
White/light and coloured
items not separated before
drying.
Wet items left sitting in the dryer
for long periods of time before
drying.
Loads not separated during
loading.
Items loaded into the dryer
incorrectly.
Load size too large.
Sheets and duvet covers
due to their size, are prone
to tangling.
WHAT TO DO
Refer to page 17.
Remove some items from the dryer.
Continuous beeping or a musical series of
beeps with a message displayed on digital
display.
Refer to page 17.
End of cycle beeps can be turned off.
Refer to page 17.
Ensure the dryer is installed on a flat,
stable surface. Refer to page 7.
Remove some items from the dryer.
Remove some items from the dryer.
Try selecting a lower 'Temperature'.
Select the 'Anti-crease' option to rotate the
load at the end of the drying cycle.
Refer to page 15.
Remember to separate white/light and
coloured items before placing them in the
dryer.
Do not leave wet items sitting in the dryer
for long periods of time before drying, if
they are prone to colour run. If you do
intend to leave them for long periods
before drying, then separate the load and
put those items that may cause colour run
aside.
Try separating out larger items from
smaller items.
Load items individually into the dryer.
Do not place folded items in the dryer.
Try drying smaller load sizes. Some
cycles have a lower maximum load size.
Refer to pages 13 and 14.
Dry sheets and duvet/doona covers
separately from other laundry. Ensure
duvet/doona covers are buttoned or
fastened closed before drying.
19
Advertisement
