Related Manuals for AVANT A35411
Summary of Contents for AVANT A35411
- Page 1 English Pressure washer 2021 1 Operator's Manual for Attachment Pressure washer Product number: A35411 www.avanttecno.com A445581 2021 1 EN 2020-...
- Page 2 Pressure washer 2021 1...
-
Page 3: Table Of Contents
Pressure washer 2021 1 CONTENTS 1. FOREWORD ............................4 Warning symbols used in this manual ........................... 5 2. DESIGNED PURPOSE OF USE......................6 3. SAFETY INSTRUCTIONS FOR USING THE ATTACHMENT ............7 Personal protective equipment ..........................9 Safe shutdown procedure ............................9 4. -
Page 4: Foreword
If you sell or transfer the equipment, be sure to hand over this manual to the new owner. If the manual is lost or damaged, you can request a new one from your Avant dealer or from the manufacturer. -
Page 5: Warning Symbols Used In This Manual
5 (24) Warning symbols used in this manual The following warning symbols are used throughout this manual. They indicate factors that must be taken into account to reduce the risk of personal injury or damage to property: WARNING SAFETY ALERT SYMBOL This symbol means: “Warning, be alert! Your safety is involved!”... -
Page 6: Designed Purpose Of Use
The AVANT Pressure washer is an attachment that is suitable for use with AVANT compact loaders that are shown in Table 1. The Pressure washer is easy to take with anywhere with the Avant loader. It can be connected directly to tap water supply, or water can be taken with the inlet hose from any reservoir. -
Page 7: Safety Instructions For Using The Attachment
7 (24) 3. Safety instructions for using the attachment Please bear in mind that safety is the result of several factors. The loader-attachment combination is highly powerful and improper or careless use or maintenance may cause serious personal injury or property damage. - Page 8 8 (24) Use the attachment only for its intended purpose. Other use may create unnecessary safety risks, and the equipment may get damaged. Make sure that the loader is equipped with necessary safety components, and that they are in working condition. Seat belt must be used. If there are specific hazards WARNING related to the operating area, use appropriate safety equipment.
-
Page 9: Personal Protective Equipment
9 (24) 3.1 Personal protective equipment Remember to wear proper personal protective equipment: The noise level at the driver's seat may exceed 85 dB(A) depending on loader model and operating cycle. Extended exposure to loud noise can cause hearing impairment. Wear hearing protection while working with the loader. ... -
Page 10: Technical Specifications
20 - 30 l/min 22,5 MPa (225 Bar) Maximum input of hydraulic energy: 40 l/min 22,5 MPa (225 Bar) Compatible AVANT loader models: See table 1 on page 4.1 Safety labels and main components of the attachment Listed below are the labels and markings on the attachment. They must be visible and readable on the equipment. - Page 11 A445603 Attachment identification plate Table 4 - Pressure washer - Main components 1 Frame with Avant quick coupling brackets 2 Washing gun 3 Hose reel 4 High pressure water pump 5 Multi connector holder...
-
Page 12: Assembling The Attachment
Do not stay in the area between the attachment and the loader. Mount the attachment only on level surface. WARNING Never move or lift an attachment that has not been locked. Avant quick coupling system: Step 1: Lift the quick attach plate locking pins up and turn them backwards into the slot so that they are locked in the upper position. -
Page 13: Connecting And Disconnecting Hydraulic Hoses
5.1 Connecting and disconnecting hydraulic hoses On Avant loaders the hydraulic hoses are connected using the multi connector system. If you have an Avant 300-700 series loader with the conventional quick couplers and wish to change to the multi connector system, contact your Avant dealer or service point for instructions or installation services. - Page 14 14 (24) Keep all fittings as clean as possible; use the protective caps on both the attachment and the loader. Dirt, ice, etc. may make using the fittings significantly more difficult. Never leave the hoses hanging on the ground; place the couplings onto the holder on the attachment.
-
Page 15: Operating The Attachment
15 (24) 6. Operating the attachment Check the attachment and the operating environment once more before starting to work, and that all obstacles have been removed from the operating area. Quick inspection of the equipment and the operating area before use are parts of ensuring safety and the best performance of the equipment. -
Page 16: Safety Distance
16 (24) 6.1 Safety distance Risk of serious injuries - High-pressure water. High- pressure water jet can cause serious injuries if hitting others who are close by. Never aim high-pressure water at a person. WARNING Hazard of thrown objects - Keep bystanders away. Note that the attachment can throw stones, gravel, or other objects found in the area at high speed. -
Page 17: Checks Before Use
17 (24) 6.2 Checks before use Read all instructions before use. Make sure you have both the Operator's manual of the loader and the Dynaset User manual of the High pressure water pumps available. Use the Pressure washer only when the loader is parked and the boom is lowered. ... -
Page 18: Use
18 (24) 6.4 Use Risk of escaping pressurized fluid, increased noise, and equipment damage - Always check that the input of hydraulic oil is within the recommended range. See the operator's manual of the loader to see correct settings for the loader. WARNING Using the Pressure washer: attachment... -
Page 19: Transport Position
19 (24) 6.5 Transport position Lift the Pressure washer off the ground before transport drive. Keep the loader stable. Always transport the attachment as low and close to the ground as possible. Keep the telescopic boom retracted during drive. 6.6 Storage Uncouple and store the attachment on level ground. -
Page 20: Maintenance And Service
Finding any fault means that the hydraulic hose or component must be replaced and the equipment must not be used until it is repaired. Spare parts are available from your nearest AVANT retailer or authorised service point. Leave the repair work to professional service technicians, if you don’t have adequate knowledge and... -
Page 21: Cleaning The Attachment
21 (24) 7.2 Cleaning the attachment Clean the attachment regularly to prevent accumulation of dirt which is more difficult to remove. A pressure washer and mild detergent can be used for cleaning. Do not use strong solvents, and do not spray directly at the hydraulic components, or at the labels on the attachment. -
Page 22: Warranty Terms
22 (24) 8. Warranty terms Avant Tecno Oy grants a warranty of one year (12 months) from the date of purchase for the attachment it manufactures. The warranty covers repair costs as follows: Work costs are covered, if the repair is not performed at the factory. - Page 23 SFS-EN ISO 12100, SFS-EN ISO 4413 Mallit / Modeller / Models Avant Hydraulitoiminen painepesuri; Avant-kuormaajan työlaite Hydraulisk högtryckstvätt; arbetsredskap för Avant lastare A35411 Hydraulic Pressure washer; attachment for Avant loaders 26.1.2021 Ylöjärvi, Finland Risto Käkelä, Toimitusjohtaja / Verkställande direktör / Managing Director...
Need help?
Do you have a question about the A35411 and is the answer not in the manual?
Questions and answers