Hartman 68040145 Assembly Instructions

PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE.
Heritage 105cm Square Adjustable Fully Woven Inlaid Casual Dining Table

ATTENTION:

1. Please read these instructions carefully before assembly
2. Aluminium is a soft metal and over tightening may strip the thread or break the part
3. DO NOT use power tools
4. Please allow 30 minutes for assembly.
5. Although assembly only requires 1 person it is advised that a second person be present to help turn the table over and into position when
fully assembled.

ASSEMBLY STEPS:

1. Remove glass (D) from table top (A), and place table upside down on a clean surface.
2. Loosely attach leg (B) to the table top (A) using bolts (E) and washer (F)
3. Tighten all bolts using spanner (H), cover all bolts using nut caps (G)
4. Turn table top over, place into base (C) gently push until it clicks into place
5. Carefully place the glass (D) on top of the table top after it is clipped at your desired height
6. See instructions below for changing table height
For more information regarding maintenance of your furniture please visit
https://www.hartmanuk.com/home

SQUARE ADJUSTABLE TABLE ADJUSTMENT INSTRUCTIONS

1. For a square adjustable table, one person is required to make the adjustment.
2. Place foot into the step at the bottom of the table base to stop the table from moving when making the adjustment.
3. Place hands on either side of the table top, and gently pull until you feel the table unclip from the base frame.
4. Lift the table top out of the base frame, rotate
placed at a different height.
5. Holding the table top at either side, gently push until you feel it click back securely into the base frame.
6. Make sure the table top is securely and evenly in place before use. If the Table top is not correctly in place, repeat steps 2 to 5 until you
are happy the table top is secure and at your desired height.
Component's

Parts List

Parts Picture
A
B
C
D
For replacement or lost spare parts please go to
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product.
ASSEMBLY INSTRUCTIONS
90°, and gently place back into the base frame. You should now see that the table has been
Q'ty
Description Part no
68040145A
Table Top 1 68208145A
68040146A
68208146A
68041145B
Leg 1 68209145B
68041146B
68209146B
68041145C
Base 1 68209145C
68041146C
68209146C
68040145D
Glass 1 68208145D
68040146D
68208146D
http://spares.hartmanuk.co.uk/purchase
Fixings
Parts list Parts Picture
E
F
G
H
Q'ty
Description Part no.
40mm*M6 4 1017162
bolts
Big Flat 4 1061162
washers
1081162
Nut Cap 4
Spanner 1 2100041