Kogan KAGDRYCD80A User Manual page 6

•
Garments which have been in contact with petroleum products should not be
machine dried. If volatile cleaning fluids are used, care should be taken to ensure
that the fluid is removed from the garment before placing in the machine.
•
Never use the tumble dryer if the power supply cable, the control panel, the working
surface or the base are damaged so that the inside of the tumble dryer is
accessible.
•
The dryer must not be used if industrial chemicals have been used for cleaning.
•
Lint must not to be allowed to accumulate around the dryer.
•
Do not dry unwashed items in the tumble dryer.
•
Fabric softeners or similar products should be used as specified by the fabric
softener instructions.
•
The final part of a tumble dryer cycle occurs without heat (cool down cycle) to
ensure that the items are left at a temperature that ensures that the items will not
be damaged.
•
The appliance must not be installed behind a lockable door, a sliding door or a door
with a hinge on the opposite side to hat of the tumble dryer, in such a way that a
full opening of the tumble dryer door is restricted.
•
The lint trap must be cleaned frequently.
•
Adequate ventilation has to be provided to avoid the back flow of gases into the
room from appliances burning other fuels, including open fires.
•
Before switching on, ensure the supply voltage is the same as that indicated on the
appliance's rating plate.
•
Should the plug need to be replaced for any reason, ensure a licensed electrician
carries out any electrical work. The wires in the mains lead are coloured in
accordance with the following code:
- Green and Yellow-Earth
- Blue-Neutral
- Brown-Live
•
The wire coloured green and yellow must be connected to the terminal marked
with the earth symbol
•
Should the appliance need to be moved, it must be transported vertically.
or coloured green and yellow.