Table of Contents
Advertisement
Emptying Water Tank
The water container collects water from the condenser. It needs to be emptied after every
drying cycle. If the water container is full, the active program will stop and the "tank full"
indicator will come on along with a buzzer tone (if enabled). To continue the program, the
water container must first be emptied.
1.
Remove water container.
2.
Empty water.
3.
Replace the water tank in to the dryer.
Water Hose Drainage
The water tank can be filled and emptied, or the drainpipe can be connected to drain it
automatically.
Remove the hose and insert the drainpipe as shown below. Pilers can be used if it is difficult
to do so.
Water tank
Advertisement
Table of Contents
