Nilfisk-Advance SW5500 B Service Manual page 290

Service Manual – SW5500, FLOORTEC R 985
Hopper Dumping Hydraulic Cylinder (continues)
Installation
11 Assemble the components in the reverse order of removal, and note the following:
◦ After the installation of the hydraulic cylinder (either the same or a new one), fill the tank with
hydraulic fluid up to the Max level, then perform some movements with the hopper (the hydraulic
system is self-bleeding); then, check the hydraulic fluid level (see
52 - Hopper System
procedure in relevant paragraph)
290