Sleep Mode Operation; Random Auto Restart Control - Panasonic CS-BE35TKE-1 Service Manual

12.6 Sleep Mode Operation

SLEEP
To maximise comfort while sleeping
(CANCEL)

This operation provides you with a comfortable environment while sleeping. It will automatically adjust the sleep
pattern temperature during the activation period.

The indoor unit indicator will dim when this operation is activated. This is not applicable if the indicator brightness
has been manually dimmed.

This operation is incorporated with the activation timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9 hours).

This operation can be set together with single timer or twin timer. Sleep operation has the priority over OFF timer.

This operation can be cancelled by pressing the respective button when the sleep timer reaches 0.0h.

Control pattern
Cooling mode
o
Setting
Temperature
Setting
Fan Speed
Selection of
OFF Timer
by
SLEEP
Heating mode
o

12.7 Random Auto Restart Control


When the power supply is cut off during the operation of air conditioner, the compressor will re-operate within
three to four minutes (there are 10 patterns between 2 minutes 58 seconds and 3 minutes 52 seconds to be
selected randomly) after power supply resumes.

This type of control is not applicable during ON/OFF Timer setting.

This control can be omitted by open the circuit of JP1 at indoor unit printed circuit board.
Normal
-2°C
60
minutes
Set Speed Set Speed
0.5 hr
1.0 hr
2.0 hrs
3.0 hrs
4.0 hrs
5.0 hrs
6.0 hrs
7.0 hrs
8.0 hrs
9.0 hrs
SLEEP
is pressed
(ON)
Normal
Set Temp
Sleep Function activated
+1°C
+1°C
+1°C
60 60 120
minutes minutes minutes
Set Speed Set Speed
Sleep Timer Activated
-1°C
1 Hr
Max 9 Hrs
39
Unit Off
120 120
minutes minutes
Set Speed
End of
Function