Heat Only Operation - Panasonic CS-BE35TKE-1 Service Manual

4 REMOTE CONTROL RECEIVING SOUND OFF/ON MODE
The Remote Control Receiving Sound OFF/ON Mode will be activated if the Auto OFF/ON button is pressed
continuously for more than 16 seconds (4 "beep" sounds will occur at 16th seconds to identify the Remote
Control Receiving Sound Off/On Mode is in standby condition) and press "AC Reset" button at remote
control.
Press "Auto OFF/ON button" to toggle remote control receiving sound.
Short "beep": Turn OFF remote control receiving sound.
o
Long "beep": Turn ON remote control receiving sound.
o
After Auto OFF/ON Button is pressed, the 20 seconds counter for Remote Control Receiving Sound OFF/ON
Mode is restarted.

14.2 Heat Only Operation

14.2.1 How to Activate/Deactivate Heat only Operation
AUTO SW
is pressed
5s
Emergency
Operation
Beep

To enable the "Heat Only" mode, press the AUTO OFF/ON SW for more than 8s and less than 11s, "Beep Beep"
sound will be heard, then release the AUTO OFF/ON SW and press remote controller CHECK button. A short
"Beep" sound will be heard. "Heat Only" mode is now enable.

To disable the "Heat Only" mode, press the AUTO OFF/ON SW for more than 8s and less than 11s, "Beep Beep"
sound will be heard, then release the AUTO OFF/ON SW and press remote controller CHECK button. A long
"Beep" sound will be heard. "Heat Only" mode is now disable.

To pump down the unit during Heat Only Operation press AUTO switch for 5 seconds.
The unit will operate under forced cooling
mode continuously if "AC reset" code is
8s
Heat Only
Forced Forced
Mode
Cooling Heating
Enable/
Operation Operation
Disable
BeepBeep BeepBeepBeep BeepBeepBeepBeep
AC reset code CHECK
code
not pressed to activate standby
11s 16s
Remote Remote
Control Control
Number Receiving
Switch Sound
Mode OFF/ON
AC reset code AC reset code
48
21s 26s 36s
No *Operation
Setting Time Check
Mode Mode
Beep No
AC reset code AC reset code
Forced
Cooling
Operation