Sleep Mode Operation; Auto Restart Control; Indication Panel; Quiet Operation (Cooling Mode/Cooling Area Of Dry Mode) - Panasonic CS-TZ60TKEW Service Manual

14.6 Sleep Mode Operation

SLEEP
To maximise comfort while sleeping
(CANCEL)

This operation provides you with a comfortable environment while sleeping. It will automatically adjust the sleep
pattern temperature during the activation period.

The indoor unit indicator will dim when this operation is activated. This is not applicable if the indicator brightness
has been manually dimmed.

This operation is incorporated with the activation timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9 hours).

This operation can be set together with single timer or twin timer. Sleep operation has the priority over OFF timer.

This operation can be cancelled by pressing the respective button when the sleep timer reaches 0.0h.

14.7 Auto Restart Control


When the power supply is cut off during the operation of air conditioner, the compressor will re-operate within
three to four minutes (there are 10 patterns between 2 minutes 58 seconds and 3 minutes 52 seconds to be
selected randomly) after power supply resumes.

This type of control is not applicable during ON/OFF Timer setting.

This control can be omitted by open the circuit of JP1 at indoor unit printed circuit board.
14.8

Indication Panel

LED
Color
Light ON
Light OFF
Note:

If POWER LED is blinking, the possible operation of the unit are Hot Start, during Deice operation, operation
mode judgment, or ON timer sampling.

If Timer LED is blinking, there is an abnormality operation occurs.

14.9 Quiet Operation (Cooling Mode/Cooling Area of Dry Mode)

A. Purpose
To provide quiet cooling operation compare to normal operation.
B. Control condition
a. Quiet operation start condition
When "POWERFUL/QUIET" button at remote control is pressed twice.
o
b. Quiet operation stop condition
1 When one of the following conditions is satisfied, quiet operation stops:
a. POWERFUL/QUIET button is pressed again.
b. Stop by OFF/ON switch.
c. Timer "off" activates.
2 When quiet operation is stopped, operation is shifted to normal operation with previous setting.
3 When fan speed is changed, quiet operation is shifted to quiet operation of the new fan speed.
4 When operation mode is changed, quiet operation is shifted to quiet operation of the new mode.
5 During quiet operation, if timer "on" activates, quiet operation maintains.
6 After off, when on back, quiet operation is not memorized.
C. Control contents
1 Fan speed is changed from normal setting to quiet setting of respective fan speed.
2 Fan speed for quiet operation is reduced from setting fan speed.
POWER TIMER
Green Orange
Operation ON Timer Setting ON
Operation OFF Timer Setting OFF
73