Page 1
P R O F E S S I O N A L S T A T I C C O N T R O L P R O D U C T S Hygro-Thermometer PHT-770 Operations Manual...
Page 2
Copyright 2001-2013 by PROSTAT Corporation. All rights reserved. Printed in the United States of America. No part of this manual may be used or reproduced in any manner whatsoever without written permission. For information contact PROSTAT Corporation, 1072 Tower Lane, Bensenville, IL 60106...
PHT-770 Hygro-Thermometer TABLE OF CONTENTS ® PROSTAT PHT-770 HYGRO-THERMOMETER Title Page # General Operation ......................3 Min/Max Function ......................3 III. Data Hold Function ......................4 Auto Power Off Feature ....................4 Lo Battery Indicator ......................4 General Specifications ....................5...
PHT-770 Hygro-Thermometer General Operation A. Remove Protective Sensor cover from unit. B. Turn the PHT-770 on by pressing the ON/OFF Button. 1. Press and hold the ON/OFF Button approximately one second. Unit will warm up in approximately 10 seconds. The unit is ready to function when the humidity and temperature is indicated, allow 60 - 80 seconds for the unit to take a reading.
PHT-770 Hygro-Thermometer III. Data Hold Function A. Press and hold the HOLD button until HLD appears on the display next to the relative humidity indicator. 1. The current reading is now being held and will not change until hold function is canceled.
Automatic power off after 20 minutes to prevent battery drains when not in use Size: 1.9 inches wide x 6.7 inches long x 0.5 inch deep Temperature - 1 Accuracy: C ( 1.8ºF) Humidity - 5% all ranges Rev: PHT-770 – 07-2001 Format modification: 01-20-2005...
Page 8
Copyright 2001-2013, Prostat Corporation Printed in U.S.A. 1072 Tower Lane, Bensenville, IL 60106 USA www.prostatcorp.com...
Need help?
Do you have a question about the PHT-770 and is the answer not in the manual?
Questions and answers