Equipment Specifications - Schulte GX-150 Operator's Manual

The GX-150 general duty rotary Cutter is designed primarily for weeds, grass, and brush
to 4" diameter. The side skirts are 13-5/8" deep. This additional room under the deck,
along with high blade tip speeds allows for a better cut and better material flow. The one
piece center shield allows for easy and full access to drivelines, clutches and gearboxes
on the center section.
GX-150
Cutting Width 180"
Transport Width:
(Singles on Wings) 93" (2.36m)
(Duals on Wings) 102" (2.59m)
Transport Height 84"
Overall Width 190"
Overall Length 202"
Cutting Height ------------- 1.75" -16.75"------------
--------- (44.5mm-425mm) ----------
HP Required (Min.) 50HP (37 kW)
Tractor HP 85HP (63 kW)
Weight 4563 lbs (2069 kg)
5113 lbs (2319 kg)
Hitch Weight 1702 lbs (772 kg)
Tractor PTO Speed ------------ 540 or 1000 RPM -----------
Cutting Cap. (Max) -------------- 4" (101.6 mm) --------------
Output Shaft -------------- 2.38" (60.3 mm) -----------
GX-150 03/21
© 2021 Alamo Group Inc.
INTRODUCTION

Equipment Specifications

Gearbox Rating
Divider
Center & Wing
Blade Tip Speed (540 RPM):
Center
Wing
Blade Tip Speed (1000 RPM):
Center
Wing
Driveline:
Main (CV):
Center & Wings
Wing Working Range 25º down to 90° up
Wing Floating Range 25º down to 30° up
Tongue Weight
Introduction Section 2-3
GX-150
260 HP (194kw)
210 HP (157kw)
------ 15980 ft./min. (4871m/min.) -------
------ 15459 ft./min. (4711m/min.) ------
------ 15974 ft./min. (4869m/min.) ------
------ 15708 ft./min. (4788m/min.) ------
540 RPM CAT 6
1000 RPM CAT 5
CAT 5
1702 lbs.