Erasing Homelink® Button Memory; In Case A Problem Occurs - Subaru 2006 Legacy Owner's Manual

from the HomeLink® button surface.
3. Press and hold the hand-held transmit-
ter button. The HomeLink® indicator light
will flash, first slowly and then rapidly.
4. When the indicator light begins to flash
rapidly, release both buttons.
The programming for the previous device
is now erased and the new device can be
operated by pushing the HomeLink® but-
ton.
Erasing HomeLink® button
memory
NOTE
Performing this procedure erases
the memory of all the preprogrammed
buttons simultaneously. The memory
of individual buttons cannot be erased.
It is recommended that upon the sale
of the vehicle, the memory of all pro-
grammed HomeLink® buttons
erased for security purposes.
1. Press and hold the two outside buttons
until the indicator light begins to flash (af-
ter 20 seconds).
2. Release both buttons.

In case a problem occurs

If you cannot activate a device using the
corresponding HomeLink® button after
programming, contact
www.homelink.com or call 1-800-355-
3515 for assistance.
be
HomeLink at
6-21
Interior equipment