Radio Operation - Subaru 2006 Legacy Owner's Manual

5-14
Audio

Radio operation

Power switch and volume/bass/tre-
ble/fader/balance control
Power switch and volume control
PUSH POWER-VOL
The dial is used for both power (ON/OFF)
and volume control. The radio is turned
ON and OFF by pushing the dial and the
volume is controlled by turning the dial.
Tone and balance control
PUSH ON/VOL
The volume control dial normally functions
as a volume control. This dial becomes a
control for Bass, Midrange, Treble, Fader
500228
or Balance when you select the appropri-
ate tone and balance control mode.
Choose desired volume level for each
mode by turning the volume control dial.
The control function returns to volume
control mode after approximately 5 sec-
onds.
AUDIO
500045
To change tone control modes: Each
brief press of the "AUDIO" button changes
control modes in the following sequence
starting from volume control mode. (When
the radio is first turned on, the control
mode is in the volume control.)
Volume
(VOLUME) (BASS)
The "AUDIO" button is used for selecting
the following control modes:
500229
Bass Midrange
(MIDDLE)
Treble
(TREBLE)