11-20
Maintenance and service
Drive belts
The alternator, power steering pump, and
air conditioner compressor depend on
drive belts. Satisfactory performance re-
quires that belt tension be correct.
2.5-liter models
1
B
A
3
1) Power steering pump pulley
2) Air conditioner compressor pulley
3) Crank pulley
New belt
0.28 – 0.35
A
(7.0 – 9.0)
0.30 – 0.33
B
(7.5 – 8.5)
2
To check belt tension, place a straight-
edge (ruler) across two adjacent pulleys
and apply a force of 22 lbs (98 N, 10 kg)
midway between the pulleys by using a
spring scale. Belt deflection should be the
amount specified.
3.0-liter models
It is unnecessary to check belt tension pe-
riodically
because
B00365
equipped with an automatic belt tension
adjuster. However, replacement of the
belt should be done according to the
maintenance schedule in the "Warranty
and Maintenance Booklet". Consult your
SUBARU dealer for replacement.
If a belt is loose, cracked, or worn, contact
your SUBARU dealer.
in (mm)
Deflection
Used belt
0.35 – 0.43
(9.0 – 11.0)
0.35 – 0.40
(9.0 – 10.0)
your
engine
is
Manual transmission oil
Checking the oil level
Non-turbo models
1) Yellow handle
1
B00427