Rear Combination Lights - Subaru 2006 Legacy Owner's Manual

Rear combination lights

Sedan
1. Push the knobs of the cover to open
the cover.
2
3
1) Rear turn signal light
2) Backup light
B00436
3) Brake/tail and rear side marker light
2. Remove the bulb holder from the rear
combination light assembly by turning it
counterclockwise.
3. Pull the bulb out of the bulb holder and
replace it with a new one.
4. Set the bulb holder into the rear combi-
nation light assembly and turn it clockwise
until it locks.
5. Securely lock the cover against the
trunk trim by using the screwdriver to turn
the top knob clockwise.
Station wagon
1
B00437
1. Using a Phillips screwdriver, remove
the upper and lower screws.
2. Wrap tape around a flat-head screw-
driver, then insert the screwdriver into the
11-51
Maintenance and service
B00134
3
1
2
B00438
– CONTINUED –