Odometer; Double Trip Meter - Subaru 2006 Legacy Owner's Manual

Odometer

This meter displays the odometer when
the ignition switch is in the "LOCK", "ACC"
or "ON" position.
The odometer shows the total distance
that the vehicle has been driven.
If you press the trip knob when the ignition
switch is in the "LOCK" position, the
odometer/trip meter will light up. If you do
not press the trip knob within 10 seconds
of illumination of the odometer/trip meter,
the odometer/trip meter will go off.
The odometer/trip meter will also go off if
you open and close the driver's door with-
in 10 seconds of illumination of the odom-
eter/trip meter.

Double trip meter

300261
This meter display two trip meters when
the ignition switch is in the "LOCK", "ACC"
or "ON" position.
The trip meter shows the distance that the
vehicle has been driven since you last set
it to zero.
To change the mode indication, briefly
push the knob.
Each press of the knob changes the mode
indication alternately.
A trip meter
B trip meter
Instruments and controls
To set the trip meter to zero, select the A
trip or B trip meter by pushing the knob
and keep the knob pushed for more than
2 seconds.
If you press the trip knob when the ignition
switch is in the "LOCK" position, the
odometer/trip meter will light up. It is pos-
sible to switch between the A trip meter
and B trip meter indications while the
odometer/trip meter is lit up. If you do not
press the trip knob within 10 seconds of il-
lumination of the odometer/trip meter, the
odometer/trip meter will go off. Also, if you
300258
open and close the driver's door within 10
seconds of illumination of the odometer/
trip meter, the odometer/trip meter will go
off.
To ensure safety, do not attempt to
change the function of the indicator
during driving, as an accident could
result.
NOTE
If the connection between the combi-
nation meter and battery is broken for
any reason such as vehicle mainte-
nance or fuse replacement, the data re-
corded on the trip meter will be lost.
3-7
– CONTINUED –