License Plate Light; Dome Light And Map Light - Subaru 2006 Forester Owner's Manual

1
2
3
4
1) Tail/stop light
2) Backup light
3) Rear turn signal light
4) Tail/stop light
2. Remove the bulb holder from the rear
combination light assembly by turning it
counterclockwise.
3. Pull the bulb from the holder. Install a
new bulb.
4. Set the bulb holder into the rear combi-
nation light assembly and turn it clockwise
until it locks.
5. Reinstall the rear combination light as-
sembly.

License plate light

B00390
1. Remove the mounting screws using a
Phillips screwdriver.
2. Remove the cover and lens.
3. Pull the bulb out of the socket. Install a
new bulb.
4. Reinstall the lens and cover.
5. Tighten the mounting screws.
Maintenance and service

Dome light and map light

0
B00391
Dome light
Map light
1. Remove the lens by prying the edge of
11-47
B00090
B00091
– CONTINUED –