Power Steering Fluid; Checking The Fluid Level - Subaru 2006 Forester Owner's Manual

Table of Contents

Advertisement

-30 -20 -10
0
10
20
30
40
-20
0
20
40
60
80
100
90
85W
80W
75W/90
SAE viscosity No. and applicable tem-
perature

Power steering fluid

Checking the fluid level

1
B00032
1) Reservoir tank
The power steering fluid expands greatly
as its temperature rises; the fluid level dif-
fers according to fluid temperature. There-
fore, the reservoir tank has two different
checking ranges for hot and cold fluids.
Check the power steering fluid level
monthly.
1. Park the vehicle on a level surface, and
stop the engine.
Maintenance and service
1
1) Specified range
2. Check the fluid level of the reservoir
B00375
tank.
When the fluid is hot after the vehicle has
been run: Check that the oil level is be-
tween "HOT MIN" and "HOT MAX" on the
surface of the reservoir tank.
When the fluid is cool before the vehicle is
run: Check that the oil level is between
"COLD MIN" and "COLD MAX" on the sur-
face of the reservoir tank.
3. If the fluid level is lower than the appli-
cable "MIN" line, add the recommended
fluid as necessary to bring the level be-
tween the "MIN" and "MAX" line.
If the fluid level is extreme low, it may indi-
cate possible leakage. Consult your
SUBARU dealer for an inspection.
11-23
1
B00376
– CONTINUED –

Advertisement

Table of Contents
loading

This manual is also suitable for:

Forester 2006

Table of Contents