CONTENTS Introduction ......................3 Reset ......................7 ......................8 Add User ....................10 Delete User ....................11 Special Function Unlock ......................13...
Introduction Product specification Fingerprint Reader Card Reader Battery Case Cover Touch Keypad Back Handle Front Handle Deadbolt Knob Mechanical Key Hole...
Page 4
Introduction Key Introduction ]: Return or quit ]: Enter User Introduction The lock has 2 levels of users: Master, User; Master: Can access by Fingerprint/Password/Card, also can add or delete User; User: Can access by Fingerprint/Password/Card; User Capacity Master: 9 Master Fingerprint/Password/Card (Master ID is 001-009) User: 241 User Fingerprint/Password/Card(User ID is 010-250) Lock Parameters Unlock Ways: Fingerprint/Password/Card/Mechanical key...
Page 5
Introduction Factory State Temporary Master Password ‘1111 1111’. The new lock at factory state is always open, it means you can unlock without Fingerprint/Password/ Card/Mechanical Key. Cancel Always Open Unlock with Fingerprint/Password/Card, the lock will lock; Setting Process After assembling the lock, you should add at least 1 Master before adding User The lock setting process as follow: Reset Add Master...
Page 6
Introduction Attention On Registering/Reading Fingerprint There are some wrong operations > Finger is dirty > Finger has water > Finger is not in the reader > Have not put the whole > Finger is injured badly finger centre There are some right operations >...
Reset Note After resetting, all the Fingerprint/Password/Card information will be deleted. A new Temporary Master Password ‘1111 1111’ (8 times 1) will be created at the same time. The Temporary Master Password will be invalid when you add the first Master successfully. Operation Step 1 Disassemble the Front Panel...
Delete User Delete Master/User Please Input Master select function Step 1 Step 2 Step 3 Input: 3 Touch Palm to Input Master Password/ awake Keypad, Fingerprint/Card Input ## (2 times #) Add User Input ID Step 4 Input ID of Master or User which you want to delete (Master ID is 001-009, User ID is 010-250) Tips 1.
Special Function Reverse lever handle Mute Mode You can turn on/off the Mute Mode by long pressing the * for 2 seconds in standby state. At Mute Mode, you can not add Master or User. Scramble Code Function You can add random scramble numbers before and after the correct code to unlock. 13562 Scrambling Correct...
Page 12
Special Function Set Language As English Or Chinese Please Input Master select function Step 1 Step 2 Step 3 Input: 4 Touch Palm to Input Master Password/ awake Keypad, Fingerprint/Card Input ## (2 times #) System Beep---, Setting Success Step 4 Input: 3 (Set as Chinese) Back to Step 4 Input: 4 (Set as English)
Unlock Unlock By Fingerprint Unlock By Password Unlock By Card Press finger (for 2 seconds) Input the correct Password Put the Card onto Reader +‘#’ and stay for 2 seconds ID... Turn down the handle to unlock Unlock By Mechanical Key If fail to unlock by Password/Fingerprint/Card, please use the Mechanical Key to unlock.
Page 14
Hướng dẫn sử dụng EL6500-TCS Vui lòng mang theo chìa khóa cơ khi ra khỏi phòng và đảm bảo có thể dễ dàng lấy trong trường hợp khẩn cấp.
Page 15
NỘI DUNG Giới thiệu ......................16 Thiết lập lại ....................20 Thêm người dùng ..................21 Xóa người dùng ....................23 Chức năng đặc biệt ..................24 Mở khóa .......................26...
Giới thiệu Tổng quan sản phẩm Cảm biến vân tay Khu vực đọc thẻ Nắp che pin Bàn phím cảm ứng Tay nắm bên trong Tay nắm bên ngoài Chốt xoay Nơi cắm chìa khóa cơ...
Page 17
Giới thiệu Giới thiệu các phím chức năng ]: Quay về hoặc thoát ]: Nhập Giới thiệu người dùng Khóa có 2 cấp độ người dùng: Chủ nhà và Người dùng; Chủ nhà: Có thể truy cập bằng Dấu vân tay/Mật khẩu/Thẻ từ, đồng thời có thể thêm và xóa Người dùng;...
Page 18
Giới thiệu Mặc định nhà máy Mật khẩu Chủ “1111 1111”. Khóa mới trong chế độ nhà máy luôn ở trạng thái mở, nghĩa là bạn có thể mở khóa mà không cần đăng nhập Dấu vân tay/Mật khẩu/Thẻ từ/Chìa khóa cơ. Quy trình cài đặt Sau khi lắp khóa, bạn cần thêm ít nhất 1 Chủ...
Page 19
Giới thiệu Chú ý khi đăng ký/đăng nhập dấu vân tay Dưới đây là một số thao tác sai > Ngón tay bị bẩn > Ngón tay dính nước > Ngón tay không ở giữa > Không chạm toàn bộ >...
Thiết lập lại Lưu ý Sau khi thiết lập lại, tất cả thông tin về Dấu vân tay/Mật khẩu/Thẻ từ sẽ bị xóa. Đồng thời, mật khẩu Chủ nhà tạm thời “1111 1111” (8 chữ số 1) sẽ được khởi tạo. Mật khẩu Chủ...
Thêm người dùng Thêm Chủ nhà Please Input Master select function Bước 1 Bước 2 Bước 3 * Chạm lòng bàn tay Nhập Mật khẩu/Dấu vân tay/ Nhập: 1 để hiện sáng Bàn Thẻ từ Chủ nhà phím, nhập ## (2 lần #) Khi bạn thêm Chủ...
Page 22
Thêm người dùng Thêm Người dùng Please Input Master select function Bước 1 Bước 2 Bước 3 Chạm lòng bàn tay để Nhập Mật khẩu/Dấu vân tay/ Nhập: 2 hiện sáng Bàn phím, Thẻ từ Chủ nhà nhập ## (2 lần #) Add User Add User Bước 4...
Xóa Người dùng Xóa Chủ nhà/Người dùng Please Input Master select function Bước 1 Bước 2 Bước 3 Chạm lòng bàn tay để Nhập Mật khẩu/Dấu vân tay/ Nhập: 3 hiện sáng Bàn phím, Thẻ từ Chủ nhà nhập ## (2 lần #) Add User Input ID Bước 4...
Chức năng đặc biệt Chế độ im lặng Bạn có thể bật/tắt Chế độ im lặng bằng cách nhấn và giữ phím * trong 2 phút ở trạng thái chờ. Ở Chế độ im lặng, bạn không thể thêm Chủ nhà hoặc Người dùng. Chức năng ẩn mật khẩu Bạn có...
Page 25
Chức năng đặc biệt Thiết lập ngôn ngữ tiếng Anh hoặc tiếng Trung Please Input Master select function Bước 1 Bước 2 Bước 3 Chạm lòng bàn tay để Nhập Mật khẩu/Dấu vân tay/ Nhập: 4 hiện sáng Bàn phím, Thẻ...
Mở khóa Mở khóa bằng vây tay Mở khóa bằng mật khẩu Mở khóa bằng thẻ từ Chạm ngón tay (trong 2 giây) Nhập Mật khẩu đúng + “#” Đặt Thẻ từ lên trên khu vực đọc và giữ nguyên trong 2 giây ID...