Remote Voice Assist - Panasonic KX-TGF770 Series Operating Instructions Manual

Using Bluetooth® Devices
2
MbN: Select the desired setting. a
MSAVEN
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Selecting the alert tone
Handset
1
For CELL 1: MMENUN#6041
For CELL 2: MMENUN#6042
2
MbN: Select the desired setting. a
MSAVEN a MOFFN

Remote voice assist

®
For iPhone and Android
users
You can use the handset or base unit to
operate the voice recognition feature of the
paired cellular phone (Siri
S Voice). For example, you can speak into the
handset or base unit and command your
cellular phone to make a call.
Compatible voice recognition features
R Google Now, S Voice (Android 4.0 or later)
R Siri (iOS 8.0 or later)
Important:
R Your cellular phone must support the
Hands Free Profile (HFP) specification.
R In order to use this feature, your cellular
phone's voice recognition feature must be
ready to use.
– iPhone: Make sure Siri is turned on.
– Android: In order to use Google Now,
make sure your cellular phone is
registered to your Google account.
R If you have multiple voice recognition
features available for your cellular phone,
you may need to set the desired voice
recognition feature as the default.
R For Android users: Depending on your
cellular phone, you may need to set Google
Now or S voice as your cellular phone's
default voice recognition feature. For more
For assistance, please visit http://shop.panasonic.com/support
70
TA Manual̲KX-TGF7xxUS̲series.pdf 70
Activating remote voice assist
1
2
3
™
smartphone
4
® ™
, Google Now , or
1
2
3
4
Note:
R While using this feature, you cannot use
R If you receive a call on the landline or on
R If you receive a call on the same cellular
R If your cellular phone is connected to the
information, refer to the operating
instructions of your cellular phone.
Handset
M N
R Go to step 3 in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 23).
MbN: Select the desired cellular phone. a
MSELECTN
Wait until "Voice assist" is displayed.
R A confirmation tone sounds.
R Speakerphone is turned on
automatically.
R To switch to the receiver, press MZN.
Speak your commands to your handset.
R When you have finished using remote
voice assist, press MOFFN.
Base unit
Press MCELL 1N or MCELL 2N
R Skip this step in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 23).
M N
Wait until "Voice assist" is displayed.
R A confirmation tone sounds.
Speak your commands to your base unit.
R When you have finished using remote
voice assist, press M
another unit to make a cellular call using
the same cellular line.
another cellular line while using this feature,
the interrupt tone sounds.
line while using this feature, voice
recognition ends and the unit receives the
incoming call.
base unit, you may not be able to use your
N or MZN.
2018/09/27 8:25:59