Panasonic KX-TGF770 Series Operating Instructions Manual page 91

Problem
The desired app does not start
when you try to start the app
using remote voice assist.
Answering system
Problem
The unit does not record new
messages.
I cannot operate the answering
system remotely.
For assistance, please visit http://shop.panasonic.com/support
TA Manual̲KX-TGF7xxUS̲series.pdf 91
Cause/solution
R In order to use this feature, your cellular phone's voice
recognition feature must be ready to use.
– iPhone: Make sure Siri is turned on.
– Android: In order to use Google Now, make sure your
cellular phone is registered to your Google account.
R If you have multiple voice recognition features installed in
your cellular phone, you may need to set the desired
voice recognition feature as the default. If you cannot set
the default, delete the other voice recognition features.
Cause/solution
R The answering system is turned off. Turn it on (page 73).
R The answering system does not answer or record calls
from cellular lines.
R The message memory is full. Erase unnecessary
messages (page 74, 75).
R The recording time is set to "Greeting only". Change
the setting (page 79).
R Your phone service provider's voicemail service may be
answering your calls before the unit's answering system
can answer your calls. Change the unit's number of rings
setting (page 78) to a lower value, or contact your phone
service provider.
R The answering system will not answer incoming calls
while the other devices such as headset or handsets are
engaged in a call.
R The remote access code is not set. Set the remote
access code (page 77).
R You are entering the wrong remote access code. If you
have forgotten your remote access code, enter the
remote access code setting to check your current code
(page 77).
R The answering system is turned off. Turn it on (page 78).
R You cannot operate the answering system when calling a
cellular phone paired to the base unit.
Useful Information
91
2018/09/27 8:26:01