Table of Contents
Advertisement
Using Bluetooth® Devices
R To use this feature, the following settings
are required.
– Android phone: Bluetooth must be
turned on.
– Android phone: [Application Alerts
manager] must be turned on.
– Handset: "Alert On/Off" must be
turned on (page 50).
R If this feature does not work, turn on your
device's Bluetooth feature, unplug the base
unit's AC adaptor, and then reconnect it.
R If this feature still does not work properly
after performing the above operation,
re-install the Link to Cell app.
Text message (SMS) alert
®
For iPhone
users
This feature alerts you on your DECT phone
when your paired cellular phone receives SMS
messages. The Link to Cell app is not required
for iPhone users.
Important:
R Your cellular phone must support Message
Access Profile (MAP) specification.
R For further information, refer to the
instructions on web page listed below:
www.panasonic.net/pcc/support/tel/sms/
R To use this feature, the following settings
are required:
– iPhone: Bluetooth must be turned on.
– Handset: "Alert On/Off" must be
turned on (page 50).
R If this feature does not work, turn on your
device's Bluetooth feature, unplug the base
unit's AC adaptor, and then reconnect it.
Alert settings for your
DECT phone
If your cellular phone is paired to the base unit
and receives notifications, the handset can
alert you:
– by briefly displaying a message
– by announcement
– by sounding alert tones
For assistance, please visit http://shop.panasonic.com/support
50
TGD66x(en)_0420_ver020.pdf
Important:
R For Android users: Use the Link to Cell app
Turning alert on/off
Once this feature is turned on, it will alert you
on the handset when your cellular phone
receives notifications.
– "On" (default): The handset alerts you.
– "Off": The handset does not alert you.
1
2
Setting the voice alert
You can turn on/off the voice alert.
– "On" (default): The handset notifies you by
– "Off": Voice announcement is not
1
2
Selecting the alert tone
1
2
Remote voice assist
You can use the handset to operate the voice
recognition feature of a paired cellular phone
(Siri
you can speak into the handset and command
your cellular phone to make a call.
50
to enable the desired alerts (page 49).
For CELL 1: MMENUN#6101
For CELL 2: MMENUN#6102
MbN: Select the desired setting. a
MSAVEN a MOFFN
voice announcement.
available as alert.
For CELL 1: MMENUN#6031
For CELL 2: MMENUN#6032
MbN: Select the desired setting. a
MSAVEN a MOFFN
For CELL 1: MMENUN#6041
For CELL 2: MMENUN#6042
MbN: Select the desired setting. a
MSAVEN a MOFFN
®
For iPhone
and Android
users
®
or Google Assistant
™
). For example,
™
smartphone
2021/04/21
17:05:38
Advertisement
Table of Contents
