Making/Answering Calls Using The Base Unit; Making Cellular Calls; Making Landline Calls - Panasonic KX-TGF770 Series Operating Instructions Manual

Making cellular calls

Important:
R The unit cannot be used to talk on 2 cellular
lines at the same time.
R Only 1 Bluetooth device can be used with
*1
the unit at a time .
R Before making calls, confirm that the
corresponding CELL indicator on the base
unit lights up (page 17).
*1 You cannot use a Bluetooth headset to
talk on a cellular line.
1
Dial the phone number.
R To correct a digit, press MCLEARN.
2
Press MCELL 1N or MCELL 2N.
3
When the other party answers, speak into
the microphone.
4
When you finish talking, press MZN.
Note:
R While on a call, you can switch from the
base unit to the handset:
– Press MINTERCOMN on the base unit.
a Select the desired handset number
on the base unit. a Press M
handset. a Press MZN on the base unit.
– If the handset is on the base unit, simply
lift it.
Adjusting the speaker volume
Press MDN or MCN repeatedly while talking.
Note:
R The speaker volume you set is kept for
each line (landline and cellular lines).
Making a cellular call using the redial
list
The last 10 phone numbers dialed are stored
in the redial list (48 digits max. each).
1
MREDIALN
2
MbN: Select the desired entry.
3
Press MCELL 1N or MCELL 2N.
For assistance, please visit http://shop.panasonic.com/support
TA Manual̲KX-TGF7xxUS̲series.pdf 31

Making/Answering Calls Using the Base Unit

Erasing a number in the redial list
1
MREDIALN
2
MbN: Select the desired entry. a
MERASEN
3
MbN: "Yes" a MSELECTN a MEXITN

Making landline calls

1
Dial the phone number.
R To correct a digit, press MCLEARN.
2
MZN
3
When the other party answers, speak into
the microphone.
4
When you finish talking, press MZN.
Note:
R While on a call, you can switch from the
base unit to the handset:
– Press M
MZN on the base unit with the call
sharing mode on (page 55).
– If the handset is on the base unit, simply
lift it.
N on the
Making a call using the redial list
The last 10 phone numbers dialed are stored
in the redial list (48 digits max. each).
1
MREDIALN
2
MbN: Select the desired entry.
3
MZN
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 47).
Example: If you need to dial the line access
number "9" when making outside calls with a
PBX:
1
9 a MPAUSEN
2
Dial the phone number. a MZN
N on the handset, then press
31
2018/09/27 8:25:57