Remote Voice Assist - Panasonic KX-TGF675 Operating Instructions Manual

Using Bluetooth® Devices
2
MbN: Select the desired setting. a
MSAVEN
3
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Selecting the alert tone
Handset
1
For CELL 1: MMENUN#6041
For CELL 2: MMENUN#6042
2
MbN: Select the desired setting. a
MSAVEN a MOFFN

Remote voice assist

®
For iPhone and Android
users
You can use the handset or base unit to
operate the voice recognition feature of the
paired cellular phone (Siri
S Voice). For example, you can speak into the
handset or base unit and command your
cellular phone to make a call.
Compatible voice recognition features
R Google Now, S Voice (Android 4.0 or later)
R Siri (iOS 8.0 or later)
Important:
R Your cellular phone must support the
Hands Free Profile (HFP) specification.
R In order to use this feature, your cellular
phone's voice recognition feature must be
ready to use.
– iPhone: Make sure Siri is turned on.
– Android: In order to use Google Now,
make sure your cellular phone is
registered to your Google account.
R If you have multiple voice recognition
features available for your cellular phone,
you may need to set the desired voice
recognition feature as the default.
R For Android users: Depending on your
cellular phone, you may need to set Google
Now or S voice as your cellular phone's
default voice recognition feature. For more
For assistance, please visit http://shop.panasonic.com/support
66
™
smartphone
® ™
, Google Now , or
information, refer to the operating
instructions of your cellular phone.
Activating remote voice assist
Handset
1
M N
R Go to step 3 in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 20).
2
MbN: Select the desired cellular phone. a
MSELECTN
3
Wait until "Voice assist" is displayed.
R A confirmation tone sounds.
R Speakerphone is turned on
automatically.
R To switch to the receiver, press MZN.
4
Speak your commands to your handset.
R When you have finished using remote
voice assist, press MOFFN.
Base unit
1
Press MCELL 1N or MCELL 2N
R Skip this step in the following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular
calls (page 20).
2
M N
3
Wait until "Voice assist" is displayed.
R A confirmation tone sounds.
4
Speak your commands to your base unit.
R When you have finished using remote
voice assist, press M
Note:
R While using this feature, you cannot use
another unit to make a cellular call using
the same cellular line.
R If you receive a call on the landline or on
another cellular line while using this feature,
the interrupt tone sounds.
R If you receive a call on the same cellular
line while using this feature, voice
recognition ends and the unit receives the
incoming call.
R If your cellular phone is connected to the
base unit, you may not be able to use your
N or MZN.