Levers And Controls; Specifications - Jet JWJ-8CS Operating Instructions And Parts Manual

8-inch woodworking jointer

Hide thumbs Also See for JWJ-8CS:

Operating instructions and parts manual (32 pages)

Table Of Contents

Table of Contents

Levers and Controls

1. Handwheel for Outfeed Table

2. Outfeed Table

3. Fence

4. Fence Adjustment Handle

5. Cutter Guard

6. Infeed Table

7. Handwheel for Infeed Table

Specifications

Model

Stock Number – Bed and Stand Kit ............................................ 718200K ....................................... 718250K

Stock Number – Bed Assembly .................................................. 718200J ....................................... 718250J

Stock Number – Stand ................................................................ 718200S ....................................... 718250S

Cutting Capacity ..................................................................... 8"W x 1/2"D .................................. 8"W x 1/2"D

Cutterhead Speed .................................................................... 5500 RPM .................................... 5500 RPM

Number of Knives .................................................................................... 3 ............................. 36 knife inserts

Rabbeting Capacity ............................................................................. 1/2" ............................... not applicable

Rabbet Ledge ..................................................................... 3-1/8" x 8-3/4" .............................. 3-1/8" x 8-3/4"

Table Surface ........................................................................... 9"W x 72"L ................................... 9"W x 72"L

Fence .......................................................................... 4-3/4"W x 38-1/2"L ....................... 4-3/4"W x 38-1/2"L

Knife Size ............................................................... 8"L x 11/16"W x 1/8"T .............. 0.59"L x 0.59"W x 0.10T

Fence Tilt.................................................................................. 45ºL, 45ºR ................................... 45ºL, 45ºR

Positive Stops ................................................................... 45ºL, 90º, 45ºR ............................ 45ºL, 90º, 45ºR

Motor ............................................................. 2HP, 1Ph, 60Hz, 230V only ......... 2HP, 1Ph, 60Hz, 230V only

Net Weight, Jointer and Stand (approx.) ....................................... 375 lbs. ......................................... 379 lbs

Shipping Weight, Jointer and Stand .............................................. 452 lbs. ......................................... 456 lbs

The above specifications were current at the time this manual was published, but because of our policy of

continuous improvement, JET reserves the right to change specifications at any time and without prior

notice, without incurring obligations.

8. On/Off Switch (Pedestal style on JWJ-8HH)

9. Rabbeting Ledge

10. Table Lock Knob

11. Fence Tilt Lock Handle

12. Fence Control Handle