Levers And Controls; Specifications - Jet JJ-8CS Operating Instructions And Parts Manual

Levers and Controls

1. Handwheel for Outfeed Table
2. Outfeed Table
3. Fence
4. Fence Adjustment Handle
5. Cutter Guard
6. Infeed Table
7. Handwheel for Infeed Table

Specifications

Model
Stock Number – Bed and Stand Kit................................708458K................................................ 708468K
Stock Number – Bed Assembly ..................................... 708458J.................................................708468J
Stock Number Stand......................................................708458S................................................ 708460S
Cutting Capacity ....................................................... 8"W x 1/2"D........................................... 8"W x 1/2"D
Cutterhead Speed ...................................................... 5500 RPM..............................................5500 RPM
Number of Knives......................................................................3.......................................36 knife inserts
Rabbeting Capacity .............................................................. 1/2".........................................not applicable
Rabbet Ledge........................................................3-1/8" x 8-3/4"........................................ 3-1/8" x 8-3/4"
Table Surface.......................................................9"W x 66-1/2"L....................................... 9"W x 66-1/2"L
Fence...................................................................4"W x 38-1/2"L....................................... 4"W x 38-1/2"L
Knife Size.................................................. 8"L x 11/16"W x 1/8"T.........................0.59"L x 0.59"W x 0.10T
Fence Tilt ................................................................... 45ºL, 45ºR ............................................ 45ºL, 45ºR
Positive Stops...................................................... 45ºL, 90º, 45ºR...................................... 45ºL, 90º, 45ºR
Motor................................................ 2HP, 1Ph, 60Hz, 230V only....................2HP, 1Ph, 60Hz, 230V only
Net Weight, Jointer and Stand (approx.) ......................... 400 lbs....................................................411 lbs
Shipping Weight, Jointer and Stand ................................ 495 lbs....................................................505 lbs
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.
8. On/Off Switch (Pedestal style on JJ-8HH)
9. Rabbeting Ledge
10. Table Lock Knob
11. Fence Tilt Lock Handle
12. Fence Control Handle
13. Belt Guard
14. Dust Chute
JJ-8CS
6
JJ-8HH