Adjusting The Fax Darkness; Viewing A Fax Log; Blocking Junk Faxes; Holding Faxes - Lexmark MB2770 User Manual

Faxing

Adjusting the fax darkness

1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Fax, and then enter the needed information.
3
Adjust the Darkness setting.
4
Send the fax job.

Viewing a fax log

Note: You may need administrative rights to view the fax logs.
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Settings > Reports > Fax.
3
Click Fax Job Log or Fax Call Log.

Blocking junk faxes

1
From the home screen, touch Settings > Fax > Analog Fax Setup > Fax Receive Settings > Admin Controls
> Block No Name Fax.
2
Apply the changes.

Holding faxes

1
From the home screen, touch Settings > Fax > Analog Fax Setup > Fax Receive Settings > Holding Faxes.
2
Select a mode.

Forwarding a fax

1
From the home screen, touch Settings > Fax > Analog Fax Setup > Fax Receive Settings > Admin Controls.
2
Configure the Fax Forwarding, Forward To, and Forward to Shortcut settings.
3
Apply the changes.
58